Five Attention Points Before an LED Driver and LED Installation

In this video, KSPOWER is going to talk a bit about five points for attention before an the Dimmable led driver, constant voltage non-dimmable waterproof Power Supply and LED installation. Failure to install this device properly may result in electrical shock or fire.

BEFORE INSTALLATION START

1. This LED Driver is to be installed in accordance with Article 450 of the National Electric Code and installed by a qualified and professional electrician. Please make sure the driver is stalled with adequate ventilation around it to allow for heat dissipation.

2. Read and follow all instructions please.

3. Power must be disconnected at all times during installation.

4. Observe polarity of the 12/24/36/48 Volt output voltage. Failure to observe polarity could damage LED lighting.

5. Total wattage of all LED fixtures used must not exceed the maximum watt rating of the Led Power Supply. To ensure optimal dimming performance, the dimming led driver requires a minimum load of 25%-80% of total capacity with Lutron, Leviton standard triac dimmers.

If you have more issues about these indoor and outdoor LED Drivers, please do get in touch with our technical team and we'll be happy to help, thanks.