Power standard introduction LED power supply can refer to the implementation

The International Electrotechnical Commission (IEC) has developed a number of standards related to Power Supplies, such as DC stabilized Power Supply standards: IEC 478.1-1974 "DC output stable power supply terminology"; IEC 48.2-1986 "DC output stable power supply ratings and performance"; IEC 478.3-1989 "Reference level and measurement of conducted electromagnetic interference from DC output stabilized power supply"; IEC 478.4-1976 "Test method for DC output stabilized power supply except radio frequency interference"; IEC478.5-1993 "DC output stabilized power supply reactance Measurement of the near-field magnetic field component. This set of standards was promulgated and implemented earlier, and China's corresponding national standards have not yet been promulgated. The electronic industry standard SJ2811.1-87 "General DC stabilized power supply terminology and definition, performance and rating" for DC stabilized power supply, and SJ2811.2-87 "General DC stable power supply test method" have been released for 13 years. For a long time, these two standards have played a significant role in the research and production of DC stabilized power supplies in China.

The International Electrotechnical Commission (IEC) promulgated IEC686-80 "AC Output Stable Power Supply" in 1980. The national standard GB/T "General Specification for AC Output Stable Power Supply" formulated with reference to this standard has been submitted for approval. The terminology in this standard, The technical requirements and test methods refer to IEC686. In addition, environmental testing requirements and test methods, quality assessment procedures, marking, packaging, transportation, storage and other requirements have been added to make it a guide to the development of AC power. A complete technical specification.

In 1994, the former Ministry of Electronics Industry promulgated the electronic industry standard SJ/T10541-94 "General technical requirements for anti-interference AC power supply" and SJ/T10542-94 "Test method for anti-interference AC power supply", which consists of China Power Supply Association AC Stable Power Professional Committee and relevant domestic power supply manufacturers, testing institutions and other responsible for the preparation of technical requirements, environmental requirements and corresponding test methods and quality inspection rules for common and anti-interference AC power supplies. I have made detailed regulations. Since the implementation of this standard, it has been widely used in the field of AC voltage regulation technology.

Other standards, such as the IEC443-1974 "Standard Power Supply for Measurement", China's Ministry of Electronics Industry Standard SJ/Z9035-87 "Standard Power Supply for Measurement" has also been applied within a certain range.

In recent years, switching power supplies and uninterruptible power supplies have been developed in China, and China has also established corresponding national standards, such as GB/T14714-93 "General technical conditions for switching power supplies for micro-computer systems and equipment", GB/T14715-93 "Information Technology Equipment" The general technical conditions for uninterruptible power supplies, etc., are also widely used in related fields.