HomeProductsOthersLED Drivers12v/30w UL Class 2 Waterproof Led Power Supply

12v/30w UL Class 2 Waterproof Led Power Supply

1 /Piece/Pieces (Min. Order)
Payment Type:
T/T,Paypal
Incoterm:
FOB,EXW,Express Delivery,DDP,DDU
Min. Order:
1 Piece/Pieces
Transportation:
Ocean,Air,Express,Land,Others
Port:
Shenzhen
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.ZH-40U12-KT

BrandKS

Warranty Period (years)5-Year

UsageLight

Output TypeDc Output

CertificationTuv

Power Supply ModeConstant Voltage Source

Power Supply Voltage1.5-36v

ColorBlack

Warranty3 Years

Efficiency90%

MaterialAluminum Case

ProtectionsOcp Ovp Scp

Input120vac

Dimensions LxWxH (in)6.97”×2.76”×1.38”

Envir. Protection RatingNema 3r

Power Factor@Max. Load>0.95

Supply Ability & Additional Information

Packaginga. 1pc per inner brown box b. 25pcs per standard carton c. custom is acceptable d. sample is available

Productivity20000

TransportationOcean,Air,Express,Land,Others

Place of OriginChina

Supply Ability500000

CertificateISO9001:2015, UL Class 2 Listed

HS Code8504401

PortShenzhen

Payment TypeT/T,Paypal

IncotermFOB,EXW,Express Delivery,DDP,DDU

Packaging & Delivery
Selling Units:
Piece/Pieces
Package Type:
a. 1pc per inner brown box b. 25pcs per standard carton c. custom is acceptable d. sample is available

The 12v Non Dimmable LED Driver is one 120VAC Input voltage, 40watt 12VDC output North America waterproof led driver certified to meet UL/cUL Class 2 RoHS safety approvals. The led power drivers use low profile alumium housing with junction box to enable easy installation makes led driver the power solutions for led tape/strip, modules, LED bar light. Featuring US Level VI energy efficiency standards of up to 90% and higher, NEMA 3R environment Protection Rating, non dimmable Led Driver Power Supply (with junction box) can outdoor use and provide outstanding high PFC peformance.



Features:


. Super compact Aluminum Case

. UL8750, Class 2

. NEMA 3R - Outdoor Use

. Auto-Reset Protection for input/output overvoltage protection, input/output overcurrent protection, over temperature

  protection, over power protection and short circuit protection


Specification:

Input Voltage            120V AC  60Hz                         

Output Voltage            12V DC                   

Operating Temperature     -20-45℃(-4-101℉)  

Mode                           Constant voltage   

Dimensions (inch)         6.97"×2.76"×1.38"        

Weight                  720g        


12/24-Volt DC Installation Guide

Highly efficient, stabilized, constant voltage DC power of LED lighting

General
- This driver is to be installed in accordance with Article 450 of the National Electric Code and installed by qualified and professional electrician;
- Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.

Before Installing
- Power must be disconnected at all times during installation.
- Observe polarity of the 12/24-volt DC output. Failure to observe polarity could damage LED lighting.
- Total wattage of all LED fixtures used must not exceed the maximum watt rating of the Power Supply.

Input Connections / Grounding
- Use the clamp connectors to secure cords and wires.
- Route and secure wires so they will not be pinched or damaged.
- All wiring must be in accordance with national and local electrical codes, low voltage Class 2 circuit. For wire runs inside of walls, use properly certified CL2 or better cabling and appropriate mounting hardware. If you are unclear as to how to install and wire this product, contact a qualified electrician. Failure to install this device properly may result in electrical shock or fire.
- Do not install Class 2 low voltage wiring in the same runs as AC main power. If AC and low voltage wires cross, keep them at 90-degree angles.
- The driver case MUST be grounded in accordance with the N.E.C. Connect the ground wire to the driver green wire.

Output Wire
- Bring the wires of the light fixture through the other clamp connector and connect them to the driver wires - positive to the red (+) wire and negative to the blue (-) wire


dimmable power supply


Package


Package
Piece/Carton(pcs)
Dimension/Carton(mm)
Dimension/Brown Box(mm)
Piece Weight(KG)
Gross Weight/Carton(KG)
OEM package 25 420 x 250 x 245 199 x 90 x 75 0.72 19



Product Categories : Others > LED Drivers

Email to this supplier
  • *Subject:
  • *To:
    Ms. Jane Deng
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*

HomeProductsOthersLED Drivers12v/30w UL Class 2 Waterproof Led Power Supply
Related Products List

Home

Product

Sign In

Shopcart

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send