HomeProductsOthersLED Drivers24V60W Constant Voltage Driver Dimmable for Led Lights

24V60W Constant Voltage Driver Dimmable for Led Lights

1 /Piece/Pieces (Min. Order)
Payment Type:
T/T,Paypal,Others
Incoterm:
FOB,EXW,Express Delivery,DDP,DDU
Min. Order:
1 Piece/Pieces
Transportation:
Ocean,Air,Express,Land,Others
Port:
Shenzhen
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.KS-60W24-KT

BrandKS

Warranty Period (years)5-Year

Lighting Solution ServiceLighting And Circuitry Design

Place Of OriginChina

Output Power1 - 50w

Output TypeSingle

Input Voltage110v

UsageLight

Output TypeConstant Voltage

CertificationUL ETL...

Power Supply ModeConstant Current Source

Warranty5 Years

Efficiency90%

ProtectionsOcp Ovp Scp

Input120vac

MaterialIron Case

Envir. Protection RatingIp20

Power Factor@Max. Load>0.95

Dimensions LxWxH (in)7.88”×3.35”×1.46”

ColorBlack, White Or Silver

Supply Ability & Additional Information

Packaginga. 1pc per inner brown box b. 40pcs per standard carton c. custom is acceptable d. sample is available

Productivity20000

TransportationOcean,Air,Express,Land,Others

Place of OriginChina

Supply Ability500000

CertificateISO9001:2015, ETL/cETL CLASS 2 FCC RoHS

HS Code850440

PortShenzhen

Payment TypeT/T,Paypal,Others

IncotermFOB,EXW,Express Delivery,DDP,DDU

Packaging & Delivery
Selling Units:
Piece/Pieces
Package Type:
a. 1pc per inner brown box b. 40pcs per standard carton c. custom is acceptable d. sample is available

AC Adaptor Class 2 Transformer 24V60W Constant Voltage Driver Dimmable for Led Lights

The Triac/phase cut dimmable driver(with junction box) is 60 wattage 24VDC 2.5Amp constant voltage AC to Dc Led Driver designed to meet ETL/cETL Class 2 safety certifications. The dimmable Led Power Supply accepts universal input voltage 120VAC 60Hz and use iron material housing for indoor lighting use only. Featuring dimmable with any standard MLV/Incandescent TRIAC (Leading edge) dimmer switch, the junction box led driver provide customers the traceable quality evaluation and includes auto reset, over current, over voltage and short circuit protection.


Features:

. Dimmable with any standard MLV/Incandescent TRIAC (Leading edge) dimmer switch

. Super Compact Iron Case

. ETL/cETLClass 2, FCC, RoHS

. IP20-Indoor Use

. Auto-Reset Protection for input/output overvoltage protection, input/output overcurrent protection, over temperature

  protection, over power protection and short circuit protection


Specification:

Input Voltage            120V AC 60Hz                          

Output Power             60W                  

Operating Temperature     -20-45℃(-4-101℉)  

Mode                           Constant Voltage  

Dimensions (inch)         7.88"×3.35"×1.46"        

Weight                  520g        


Installation Guide

General
- This driver is to be installed in accordance with Article 450 of the National Electric Code and installed by qualified and professional electrician;
- Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.

Before Installing
- Power must be disconnected at all times during installation.
- Observe polarity of the 12/24-volt DC output. Failure to observe polarity could damage LED lighting.
- Total wattage of all LED fixtures used must not exceed the maximum watt rating of the Power Supply.

Input Connections / Grounding
- Use the clamp connectors to secure cords and wires.
- Route and secure wires so they will not be pinched or damaged.
- All wiring must be in accordance with national and local electrical codes, low voltage Class 2 circuit. For wire runs inside of walls, use properly certified CL2 or better cabling and appropriate mounting hardware. If you are unclear as to how to install and wire this product, contact a qualified electrician. Failure to install this device properly may result in electrical shock or fire.
- Do not install Class 2 low voltage wiring in the same runs as AC main power. If AC and low voltage wires cross, keep them at 90-degree angles.
- The driver case MUST be grounded in accordance with the N.E.C. Connect the ground wire to the driver green wire.

Output Wire
- Bring the wires of the light fixture through the other clamp connector and connect them to the driver wires - positive to the red (+) wire and negative to the blue (-) wire

Iron Box Drawing

Package


Package
Piece/Carton(pcs)
Dimension/Carton(mm)
Dimension/Brown Box(mm)
Piece Weight(KG)
Gross Weight/Carton(KG)
OEM package 40 440 x 410 x 205 215 x 95 x 40 0.52 22.5

Product Categories : Others > LED Drivers

Email to this supplier
  • *Subject:
  • *To:
    Ms. Jane Deng
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*

HomeProductsOthersLED Drivers24V60W Constant Voltage Driver Dimmable for Led Lights
Related Products List

Home

Product

Sign In

Shopcart

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send