smart portable charger main function

October 23, 2019

One hundred card smart portable Adapter Charger main function

◆Output overvoltage protection:

If the output voltage is too high, it may cause catastrophic accidents to the electrical equipment. To prevent such occurrences, this series of high-frequency modules is equipped with an over-voltage protection circuit. When overvoltage occurs, the module is automatically locked, and the corresponding module fault indicator lights up. The module automatically exits the work without affecting the normal operation of the entire system. Overvoltage protection point is generally set to 313V ± 2V (220V), overvoltage alarm point software can be set.

◆Output current limit protection:

The maximum output current of the module is limited to 1.05 times of the rated output current (can be set) and the constant current and voltage limiting work mode.

◆Short circuit protection:

When the output is short-circuited, the module will pull the output voltage down to almost zero and limit the short-circuit current below the current limit point. At this time, the output power of the module is very small to achieve the purpose of protecting the module. The module can work in the short-circuit state for a long time and will not be damaged. After the fault is rectified, the module can automatically resume operation.

◆ Parallel protection of modules:

Each Battery Charger has a diode parallel protection circuit inside, which absolutely guarantees that the fault module will automatically exit the system without affecting the operation of other normal modules. The Li-ion Battery Charger can be connected directly at the output.

The above is the smart portable charger main function we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Detailed explanations of three commonly used LED driver power supplies

Next:Is the constant voltage power supply or the constant current power supply used to power the LED?