Business applications, applications containing relevant information of applicants, manufacturers, manufacturers and products. Each type of product should be applied separately. The same model, different manufacturers of goods should also be applied separately.
Stage 1: After the application has been accepted and the application has been received, the CQC sends a notice of acceptance to the applicant to notify the applicant to send or send the relevant documents and materials. The application phase changes to 1. At the same time, CQC sends relevant charges and notices. The applicant provided the data to the CQC as required. After the applicant pays, please fill in the payment voucher as required. Phase 2: Data Review During the data review phase, the product certification engineer must divide the application into units. After the unit is divided, if a sample test is required, the product certification engineer sends the sample notification and corresponding payment notice to the applicant, and at the same time, informs the applicant to send a sample acceptance notice to the corresponding testing organization. Phase 3: The samples received by the sample are sent directly by the applicant to the designated testing institute. After the applicant pays, please fill in the payment voucher as required. The testing organization will accept the acceptance of the sample for receiving the call, fill in the sample acceptance report, and issue a sample rectification notice for the unqualified sample, fill in the sample acceptance report after rectification. After the sample is accepted, the testing agency fills out the sample inspection schedule and reports it to the CQC. After receiving the sample inspection progress, CQC issued a formal acceptance notice to the applicant after confirming that the relevant costs of the applicant were paid, and issued a test task letter to the testing organization, and the sample test was officially started. Phase 4: During the testing of the sample test sample, the applicant shall correct the non-conformity of the sample according to the sample test rectification notice. After the sample test is completed, the testing agency fills out the sample test result notification. The testing organization also transmits the test report and other data to the CQC. Stage 5: Factory inspections The inspection department organizes factory inspections for applications that require factory inspections. Stage 6: Conformity assessment product certification engineers collect and sort out the results of each stage and conduct an initial evaluation. The conformity assessor re-evaluates the above results. Stage 7: Certificate Approval Director Signing the Certificate Phase 8: Printing, Receiving, Sending, and Managing the Certificate The applicant prints the receipt for the receipt of the certificate, and either collects or requests the sending of the certificate.
Shenzhenshi Zhenhuan Electronic Co.,Ltd was founded in 2008, specialize in external power adaptor, ac dc adapter, Outdoor Waterproof Power Supply, led driver, Power Transformer, switching power supply, dimmable or non-dimmable LED Drivers and Battery Charger in Shenzhen, China.
November 27, 2020
