Communicate with Supplier? Supplier
Jane Deng Ms. Jane Deng
What can I do for you?
Chat Now Contact Supplier

Shenzhenshi Zhenhuan Electronic Co Ltd


Home > Products > Constant Voltage Led Drivers > Iron Case Class 2 Led Driver > 100W 24V4A Power Supplies Led Driver Junction Box

100W 24V4A Power Supplies Led Driver Junction Box

100W 24V4A Power Supplies Led Driver Junction Box

Payment Type: T/T,Paypal
Incoterm: FOB,EXW
Min. Order: 1 Piece/Pieces
Delivery Time: 5 Days

Basic Info

    Model No.: KS-100W24-KO

    Usage: Light

    Output Type: DC Output

    Certification: TUV

    Power Supply Mode: Constant Voltage Source

    Warranty: 3 Years

    Efficiency: 90%

    Protections: OCP OVP SCP

    Input: 120VAC

    Material: Iron Case

    Envir. Protection Rating: Indoor

    Power Factor@Max. Load: >0.95

    Dimensions LxWxH (in): 7.88”×3.35”×1.46”

    Color: Black, White Or Silver

Additional Info

    Packaging: a. 1pc per inner brown box b. 40pcs per standard carton c. custom is acceptable

    Productivity: 10000

    Brand: ZH

    Transportation: Ocean,Air,Express

    Place of Origin: China

    Supply Ability: 500000

    Certificate: ISO9001:2015, ETL/cETL FCC Class 2 RoHS

    HS Code: 8504401

    Port: Shenzhen

Product Description

The 24v non Dimmable Led Driver is one 120VAC Input voltage, 100watt 24VDC 4000mA output North America indoor LED Driver certified to meet ETL/cETL Class 2 safety approvals. The Led Power Supply use low profile iron case with junction box to enable easy installation makes led driver the power solutions for led tape/strip, modules, LED bar light. Featuring US Level VI energy efficiency standards of up to 90% and higher, IP20 environment Protection Rating, non dimmable Led Driver Power Supply (with junction box) can indoor use and provide outstanding high PFC peformance. Class 2 power transformer


. Super compact IRON CASE


. IP20 - Indoor Use

. Auto-Reset Protection for input/output overvoltage protection, input/output overcurrent protection, over temperature

protection, over power protection and short circuit protection


Input Voltage 120V AC 60Hz

Output Voltage 24V DC

Operating Temperature -20-45℃(-4-101℉)

Mode Constant voltage

Dimensions (inch) 7.88"×3.35"×1.46"

Weight 520g

12/24-Volt DC Installation Guide

Highly efficient, stabilized, constant voltage DC power of LED lighting

- This driver is to be installed in accordance with Article 450 of the National Electric Code and installed by qualified and professional electrician;
- Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.

Before Installing
- Power must be disconnected at all times during installation.
- Observe polarity of the 12/24-volt DC output. Failure to observe polarity could damage LED lighting.
- Total wattage of all LED fixtures used must not exceed the maximum watt rating of the power supply.

Input Connections / Grounding
- Use the clamp connectors to secure cords and wires.
- Route and secure wires so they will not be pinched or damaged.
- All wiring must be in accordance with national and local electrical codes, low voltage Class 2 circuit. For wire runs inside of walls, use properly certified CL2 or better cabling and appropriate mounting hardware. If you are unclear as to how to install and wire this product, contact a qualified electrician. Failure to install this device properly may result in electrical shock or fire.
- Do not install Class 2 low voltage wiring in the same runs as AC main power. If AC and low voltage wires cross, keep them at 90-degree angles.
- The driver case MUST be grounded in accordance with the N.E.C. Connect the ground wire to the driver green wire.

Output Wire
- Bring the wires of the light fixture through the other clamp connector and connect them to the driver wires - positive to the red (+) wire and negative to the blue (-) wire

Iron Case Led Driver Dimenion


Dimension/Brown Box(mm)
Piece Weight(KG)
Gross Weight/Carton(KG)
OEM package 40 440 x 410 x 205 215 x 95 x 40 0.52 22.5

Looking for ideal Indoor Power Supplies Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the 24v Indoor Power Supply are quality guaranteed. We are China Origin Factory of 24v Constant Voltage Led Driver. If you have any question, please feel free to contact us.

Product Categories : Constant Voltage Led Drivers > Iron Case Class 2 Led Driver

Send Inquiry

Jane Deng

Ms. Jane Deng



Mobile Phone:+8618948752180

Address:8-9 Floor, Building 2, Fengxing Lane No.1, Fenghuang First Industrial Zone, Fuyong St., Baoan Dist., Shenzhen, Guangdong, China, Shenzhen, Guangdong



About Us