Contact Supplier

Ms. Jane Deng
Leave a messagePayment Type: | T/T,Paypal |
---|---|
Incoterm: | FOB,EXW |
Min. Order: | 1 Piece/Pieces |
Delivery Time: | 5 Days |
Basic Info
Model No.: ZH-DV60-24
Usage: Vehicle, Digital Products, Construction, Industry, Light
Output Type: Single, DC Output
Certification: CCC, ISO9001, ROSH, UL, CE, TUV
Power Supply Mode: Constant Voltage Source
Warranty: 3 Years
Protections: OCP OVP SCP
Input: 120VAC
Efficiency: 90%
Color: Black
Dimensions LxWxH (in): 6.97”×2.76”×1.38”
Power Factor@Max. Load: >0.9
Material: Iron Case
Envir. Protection Rating: Indoor
Additional Info
Packaging: a. 1pc per inner brown box b. 25pcs per standard carton c. custom is acceptable
Productivity: 20000
Brand: ZH
Transportation: Ocean,Air,Express
Place of Origin: China
Supply Ability: 500000
Certificate: ISO9001:2015, UL Class 2 Listed
HS Code: 850440
Port: Shenzhen
Product Description
The 60 watt LED Driver circuit is a highly reliable, 120VAC input voltage constant voltage mode Led Power Supply. The 12V 24V Dimmable voltage LED driver is a UL8750 class 2 rated and designed to meet US Level VI energy efficiency standards, up to efficiency of 90% and higher. Featuring high PFC more than 0.95 and provides outstanding led dimming peformance, the led driver is the ideal solution to provides customers with high quality and safety Power Supply for LED equipments.
Features:
. Dimmable with any standard MLV/Incandescent TRIAC (Leading edge) dimmer switch
. Super compact IRON CASE
. UL8750, Class 2
. IP20 - Indoor Use
. Auto-Reset Protection for input/output overvoltage protection, input/output overcurrent protection, over temperature
protection, over power protection and short circuit protection
Input Voltage 120V AC
Output Voltage 24V DC
Operating Temperature -20℃-45℃(-4℉-101℉)
Mode Constant voltage
Dimensions (inch) 6.97"×2.76"×1.38"
Weight 720g
12/24-Volt DC Installation Guide
Highly efficient, stabilized, constant voltage DC power of LED lighting
General
- This driver is to be installed in accordance with Article 450 of the National Electric Code and installed by qualified and professional electrician;
- Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
Before Installing
- Power must be disconnected at all times during installation.
- Observe polarity of the 12/24-volt DC output. Failure to observe polarity could damage LED lighting.
- Total wattage of all LED fixtures used must not exceed the maximum watt rating of the power supply.
Input Connections / Grounding
- Use the clamp connectors to secure cords and wires.
- Route and secure wires so they will not be pinched or damaged.
- All wiring must be in accordance with national and local electrical codes, low voltage Class 2 circuit. For wire runs inside of walls, use properly certified CL2 or better cabling and appropriate mounting hardware. If you are unclear as to how to install and wire this product, contact a qualified electrician. Failure to install this device properly may result in electrical shock or fire.
- Do not install Class 2 low voltage wiring in the same runs as AC main power. If AC and low voltage wires cross, keep them at 90-degree angles.
- The driver case MUST be grounded in accordance with the N.E.C. Connect the ground wire to the driver green wire.
Output Wire
- Bring the wires of the light fixture through the other clamp connector and connect them to the driver wires - positive to the red (+) wire and negative to the blue (-) wire
Package
Piece/Carton(pcs)
Dimension/Carton(mm)
Dimension/Brown Box(mm)
Piece Weight(KG)
Gross Weight/Carton(KG)
OEM package 25 420 x 250 x 245 199 x 90 x 75 0.72 19
Product Categories : Constant Voltage Led Drivers > 120V Input Indoor Rated Dimmable Led Driver