Shenzhenshi Zhenhuan Electronic Co., Ltd
0 Piece，Product Price: US $ 0
Model No.: KS-20W12-KO
Warranty Period (years): 5-Year
Lighting Solution Service: Lighting And Circuitry Design
Place Of Origin: China
Output Power: 1 - 50w
Output Type: Single
Input Voltage: 110v
Usage: Light
Output Type: Dc Output
Certification: ETL
Power Supply Mode: Constant Voltage Source
Warranty: 5 Years
Efficiency: 90%
Protections: Ocp Ovp Scp
Input: 120vac
Material: Iron Case
Envir. Protection Rating: Indoor Use
Power Factor@Max. Load: >0.95
Dimensions LxWxH (in): 7.88”×3.35”×1.46”
Color: Black, White Or Silver
| Quantity（Piece/Pieces） | 1 ~ 8 | 9 ~ 100 | >100 |
| Est. Time（days) | 7 | 25 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
12V20W High PFC ETL class 2 led driver
The CV led driver is one 20 watt 12 volt 1700mA dc output constant voltage led driver designed to meet ETL/cETL Class 2 RoHS safety approvals and conducted emission requirements for FCC. The led light power driver use low profile iron material housing with junction box to enable easy installation makes the 12v led driver perfect to suit for cabinet light, Kitchen light and other led products. The Led Power Supply follows the feature of universal input voltage 120VAC 60Hz and high PFC 0.95, provide remarkable after-sale service.
Features:
． Super Compact Metal Iron Case
． ETL/cETL CLASS 2 FCC RoHS
． IP20 - indoor Use
． Auto-Reset Protection for input/output overvoltage protection, input/output overcurrent protection, over temperature
protection, over power protection and short circuit protection
Input Voltage 120V AC 60Hz
Output Voltage 12V DC
Operating Temperature -20℃-45℃(-4℉-101℉)
Mode Constant voltage
Dimensions (inch) 7.88"×3.35"×1.46"
Weight 520g
12/24-Volt DC Installation Guide
Highly efficient, stabilized, constant voltage DC power of LED lighting
General
- This driver is to be installed in accordance with Article 450 of the National Electric Code and installed by qualified and professional electrician;
- Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
Before Installing
- Power must be disconnected at all times during installation.
- Observe polarity of the 12/24-volt DC output. Failure to observe polarity could damage LED lighting.
- Total wattage of all LED fixtures used must not exceed the maximum watt rating of the Power Supply.
Input Connections / Grounding
- Use the clamp connectors to secure cords and wires.
- Route and secure wires so they will not be pinched or damaged.
- All wiring must be in accordance with national and local electrical codes, low voltage Class 2 circuit. For wire runs inside of walls, use properly certified CL2 or better cabling and appropriate mounting hardware. If you are unclear as to how to install and wire this product, contact a qualified electrician. Failure to install this device properly may result in electrical shock or fire.
- Do not install Class 2 low voltage wiring in the same runs as AC main power. If AC and low voltage wires cross, keep them at 90-degree angles.
- The driver case MUST be grounded in accordance with the N.E.C. Connect the ground wire to the driver green wire.
Output Wire
- Bring the wires of the light fixture through the other clamp connector and connect them to the driver wires - positive to the red (+) wire and negative to the blue (-) wire
Package
Piece/Carton(pcs)
Dimension/Carton(mm)
Dimension/Brown Box(mm)
Piece Weight(KG)
Gross Weight/Carton(KG)
OEM package 40 440 x 410 x 205 215 x 95 x 40 0.52 22.5
Product Categories : Others > LED Drivers
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
